%
% File ijcnlp-05.tex
% February 2005

\documentclass[11pt]{article}
\usepackage{ijcnlp-05}
\usepackage{times}
\usepackage{latexsym}

\title{Instructions for IJCNLP-05 Tutorial Abstracts, Posters, and Workshop Papers}

\author{First Author \\
  Affiliation of First Author \\
  Address Line 1 \\
  Address Line 2 \\
  {\tt author1@email} \And
  Second Author \\
  Affiliation of Second Author \\
  Address Line 1 \\
  Address Line 2 \\  
  {\tt author2@email}}

\date{}

\begin{document}

\maketitle

\begin{abstract}
  This document contains the instructions for preparing \emph{tutorial abstracts}, \emph{poster papers}, and \emph{workshop papers} to IJCNLP-05.
  The document itself conforms
  to its own specifications, and is therefore an example of what
  your manuscript should look like.  Authors are asked to conform to
  all the directions reported in this document.

\end{abstract}

\section{Introduction}

The following instructions are directed to authors of tutorial abstracts and
papers submitted to the poster session and workshops in IJCNLP-05.

All authors are required to adhere to these
specifications. Authors should prepare their camera-ready paper in Portable Document
Format (PDF) format.

\section{Using the provided style files}

The easiest way to correctly format your paper is to use one of the
style files provided on the conference web page. For instance, \LaTeX{}
users can use the {\bf ijcnlp-05.sty} style file, and Microsoft Word
users can use the {\bf ijcnlp-05.dot} document template.

Figure \ref{latex-skeleton} shows a skeleton document for \LaTeX{}
users.  To use it, simply copy the text in the figure to a file and then
replace the parts flagged by {\bf TODO} as appropriate for your
document.  Figure \ref{bibtex-skeleton} shows the simple Bib\TeX{} file
used by the skeleton document.

%% By using these style files most of the requirements discussed in the
%% following sections will be automatically handled. Nonetheless, you should
%% review the sections to become familiar with the requirements.

\begin{figure}

%%........................................................................
%% start of embedded latex example
\begin{small}
\begin{verbatim}
\documentclass[11pt]{article}
\usepackage{ijcnlp-05}
\usepackage{times}
\usepackage{latexsym}

\title{TODO: put title here}

\author{Author1 \\ address \\ {\tt email} 
   \And Author2 \\ address \\ {\tt email} \\
TODO: fill in the author names here}

\date{}

\begin{document}
\maketitle

\begin{abstract}
TODO: put the abstract here
\end{abstract}

\section{Introduction}
TODO: add introduction; and,
perhaps cite WordNet \cite{Miller-90}

\section{TODO: add body of paper}

\section{Conclusion}
TODO: add conclusion

\section*{Acknowledgements}
TODO: add acknowledgements

\bibliographystyle{ijc}
%% TODO: use base name of your .bib file
\bibliography{my-citations}     

\end{document}
\end{verbatim}
\end{small}
%% end of embedded latex example
%%........................................................................

\caption{Skeleton \LaTeX{} document illustrating use of {\bf ijcnlp-04.sty} and
  {\bf ijc.bst}}
\label{latex-skeleton}
\end{figure}


\begin{figure}
\begin{small}
\begin{verbatim}
@Article{Miller-90,
  author =   {G. Miller},
  title =    {Special Issue on {WordNet}},
  journal =  {International Journal of
              Lexicography},
  year =     {1990},
  volume =   {3(4)},
}
\end{verbatim}
\end{small}
\caption{Bib\TeX{} file {\bf my-citations.bib} used in skeleton document}
\label{bibtex-skeleton}
\end{figure}

\section{General Instructions}

Manuscripts must be in two-column format.  Exceptions to the
two-column format include the title, authors' names and complete
addresses, which must be centered at the top of the first page, and
any full-width figures or tables (see the guidelines in
Subsection~\ref{ssec:first}).
{\bf Type single-spaced.}  Start
all pages directly under the top margin.  See the guidelines later
regarding formatting the first page. 

{\bf Do not print page numbers on the manuscript.}

The maximum length is six ($6$) pages for poster papers, eight ($8$) pages for workshop papers, and one ($1$) page for tutorial abstracts (see Subsection~\ref{ssec:layout} for
exact page layout and Section~\ref{sec:length} for additional
information on the maximum number of pages).


\section{Format of Electronic Manuscript}
\label{sect:pdf}

For the production of the electronic manuscript you must use Adobe's
Portable Document Format (PDF). This format can be generated from
postscript files: on Unix systems, you can use {\tt ps2pdf} for this
purpose; under Microsoft Windows, Adobe's Distiller can be used.  Note
that some word processing programs generate PDF which may not include
all the necessary fonts (esp. tree diagrams, symbols). When you print
or create the PDF file, there is usually an option in your printer
setup to include none, all or just non-standard fonts.  Please make
sure that you select of the option of including ALL the fonts.  {\em
  Before sending it, test your {\/\em PDF} by printing it from a
  computer different from the one where it was created}. Moreover,
some word processor may generate very large postscript/PDF files,
where each page is rendered as an image. Such images may reproduce
poorly.  In this case, try alternative ways to obtain the postscript
and/or PDF.  One way on some systems is to install a driver for a
postscript printer, send your document to the printer specifying
``Output to a file'', then convert the file to PDF.

For reasons of uniformity, Adobe's {\bf Times Roman} font should be
used. In \LaTeX2e{} this is accomplished by putting

\begin{quote}
\begin{verbatim}
\usepackage{times}
\usepackage{latexsym}
\end{verbatim}
\end{quote}
in the preamble.

Additionally, it is of utmost importance to specify the {\bf
  A4 format} (21cm $\times$ 29.7cm) when formatting the paper.
When working with {\tt dvips}, for instance, one should specify {\tt
  -t a4}.

\subsection{Layout}
\label{ssec:layout}

Print the manuscript two columns to a page, in the manner these
instructions are printed. The exact dimensions for a page on A4
paper are:

%\begin{quote}
\begin{tabular}{ll} 
Left and right margins: & 2.5cm (1 in) \\
Top margin: & 2.5cm (1 in) \\
Bottom margin: & 3.7cm (1.5 in) \\
Columns width: & 7.6cm (3 in) \\
Column height: & 23.5cm (9.4 in) \\
Gap between columns: & 0.6cm (0.25 in) \\
\end{tabular}
%\end{quote}


\subsection{The First Page}
\label{ssec:first}

Center the title, author's name(s) and affiliation(s) across both
columns. Do not use footnotes for affiliations.   Use the two-column format only when you begin the abstract.

{\bf Title}: Place the title centered at the top of the first page, in
a 15-point bold font. Long titles should be typed on two lines without
a blank line intervening. Approximately, put the title at 1in from the
top of the page, followed by a blank line, then the author's names(s),
and the affiliation on the following line.  Do not use only initials
for given names (middle initials are allowed). The affiliation should
contain the author's complete address, and if possible an electronic
mail address. Leave about 0.75in between the affiliation and the body
of the first page.

{\bf Abstract}: Type the abstract at the beginning of the first
column.  The width of the abstract text should be smaller than the
width of the columns for the text in the body of the paper by about
0.25in on each side.  Center the word {\bf Abstract} in a 12 point
bold font above the body of the abstract. The abstract should be a
concise summary of the general thesis and conclusions of the paper.
It should be no longer than 200 words.

{\bf Text}: Begin typing the main body of the text immediately after
the abstract, observing the two-column format as shown in 
the present document. Type single spaced. 

{\bf Indent} when starting a new paragraph. For reasons of uniformity,
use Adobe's {\bf Times Roman} fonts, with 11 points for text and 
subsection headings, 12 points for section headings and 15 points for
the title. If Times Roman is unavailable, use {\bf Computer Modern
  Roman} (\LaTeX2e{}'s default; see section \ref{sect:pdf} above).
Note that the latter is about 10\% less dense than Adobe's Times Roman
font.

\subsection{Sections}

{\bf Headings}: Type and label section and subsection headings in the
style shown on the present document.  Use numbered sections (Arabic
numerals) in order to facilitate cross references. Number subsections
with the section number and the subsection number separated by a dot,
in Arabic numerals. Do not number subsubsections.

{\bf Citations}: Follow the ``Guidelines for Formatting Submissions''
to {\em Computational Linguistics\/} that appears in the first issue of
each volume, if possible.  That is, citations within the text appear
in parentheses as~\cite{Gusfield:97} or, if the author's name appears in
the text itself, as Gusfield~\shortcite{Gusfield:97}. 
Append lowercase letters to the year in cases of ambiguities.  
Treat double authors as in~\cite{Aho:72}, but write as 
in~\cite{Chandra:81} when more than two authors are involved. 
Collapse multiple citations as in~\cite{Gusfield:97,Aho:72}.

\textbf{References}: Gather the full set of references together under
the heading {\bf References}; place the section before any Appendices,
unless they contain references. Arrange the references alphabetically
by first author, rather than by order of occurrence in the text.
Provide as complete a citation as possible, using a consistent format,
such as the one for {\em Computational Linguistics\/} or the one in the 
{\em Publication Manual of the American 
Psychological Association\/}~\cite{APA:83}. 

The provided \LaTeX{} and Bib\TeX{} style files roughly fit the
American Psychological Association format, allowing regular citations, 
short citations and multiple citations as described above.

{\bf Appendices}: Appendices, if any, directly follow the text and the
references (but see above).  Letter them in sequence and provide an
informative title: {\bf Appendix A. Title of Appendix}.

The \textbf{Acknowledgements} section should go as the last section immediately
before the references.  Do not number the acknowledgements section.

\subsection{Footnotes}

{\bf Footnotes}: Put footnotes at the bottom of the page. They may
be numbered or referred to by asterisks or other
symbols.\footnote{This is how a footnote should appear.} Footnotes
should be separated from the text by a line.\footnote{Note the
line separating the footnotes from the text.}

\subsection{Graphics}

{\bf Illustrations}: Place figures, tables, and photographs in the
paper near where they are first discussed, rather than at the end, if
possible.  Wide illustrations may run across both columns. Do not use
color illustrations as they may reproduce poorly.

{\bf Captions}: Provide a caption for every illustration; number each one
sequentially in the form:  ``Figure 1. Caption of the Figure.'' ``Table 1.
Caption of the Table.''  Type the captions of the figures and 
tables below the body, using 11 point text.  


\section{Length of Submission}
\label{sec:length}

IJCNLP-05 poster papers should be limited to $6$ pages, workshop papers $8$ pages, and tutorial abstracts $1$ page. All illustrations,
references, and appendices must be accommodated within
these page limits, observing the formatting instructions
given in the present document. 


\section*{Acknowledgements}

This document has been adapted by Tom O'Hara and Dan Roth from the
instructions for the ACL-2002 proceedings by Dekang Lin
and Eugene Charniak.  It was adapted in turn from the
ACL-01 proceedings by Norbert Reithinger, Giorgio Satta,
and Roberto Zamparelli. The ACL-01 instructions were
elaborated from similar documents used for previous
editions of the ACL and EACL annual meetings. Those
versions were written by several people, including John
Chen, Henry S. Thompson and Donald Walker. Additional
elements were taken from the formatting instructions of
the Xth {\em International Joint Conference on
Artificial Intelligence}.  The precise instructions were modified by Olivia Kwong for IJCNLP-04 and IJCNLP-05.


%\bibliographystyle{ijc}
%\bibliography{sample}

\begin{thebibliography}{}

\bibitem[\protect\citename{Aho and Ullman}1972]{Aho:72}
Alfred~V. Aho and Jeffrey~D. Ullman.
\newblock 1972.
\newblock {\em The Theory of Parsing, Translation and Compiling}, volume~1.
\newblock Prentice-{Hall}, Englewood Cliffs, NJ.

\bibitem[\protect\citename{{American Psychological Association}}1983]{APA:83}
{American Psychological Association}.
\newblock 1983.
\newblock {\em Publications Manual}.
\newblock American Psychological Association, Washington, DC.

\bibitem[\protect\citename{{Association for Computing Machinery}}1983]{ACM:83}
{Association for Computing Machinery}.
\newblock 1983.
\newblock {\em Computing Reviews}, 24(11):503--512.

\bibitem[\protect\citename{Chandra \bgroup et al.\egroup }1981]{Chandra:81}
Ashok~K. Chandra, Dexter~C. Kozen, and Larry~J. Stockmeyer.
\newblock 1981.
\newblock Alternation.
\newblock {\em Journal of the Association for Computing Machinery},
  28(1):114--133.

\bibitem[\protect\citename{Gusfield}1997]{Gusfield:97}
Dan Gusfield.
\newblock 1997.
\newblock {\em Algorithms on Strings, Trees and Sequences}.
\newblock Cambridge University Press, Cambridge, UK.

\end{thebibliography}

\end{document}